Fixing - Enphase Microinverter Support on ESDEC Rails - 1x Self-drilling screw

ESDEC

Fixing - Enphase Microinverter Support on ESDEC Rails - 1x Self-drilling screw

Name: Fixing - Enphase Microinverter Support on ESDEC Rails - 1x Self-drilling screw
Brand: ESDEC
SKU: DF00046
Price: 1.00 EUR
Availability: InStock

€1,00

SKU: DF00046

APsystems compatible Micro-inverter bracket. It screws onto the ESDEC Click Fit Evo rail on its upper flat face. The Kit includes 1x self-drilling screws with a tightening force much greater than standard self-drilling screws. To find out how to install an ESDEC Clic Fit Evo kit , consult our Guide here.

Instructions for use: 1/ Use a screwdriver with a suitable hexagonal bit. 2/ Use the maximum rotation speed to start drilling. 3/ When the hole and thread are operational, insert the APs micro-inverter into the central slot provided for this purpose. 4/ Tighten moderately to avoid "missing the thread" and crushing the molded aluminum plate of the micro-inverter (if you have a clutch function on your screwdriver, it is time to use it). Footprint: 8 mm hexagonal key Screw dimensions: 6x25 mm Seal under the stainless steel washer: diameter 16 mm K2 reference: 1005207

Fixing - Enphase Microinverter Support on ESDEC Rails - 1x Self-drilling screw

€1,00

In accordance with the provisions of the Consumer Code concerning the amicable settlement of disputes, Oscaro Power adheres to the e-commerce Mediator Service of FEVAD (Federation of e-commerce and distance selling) whose contact details are as follows: Consumer Mediator FEVAD - BP 20015 - 75362 PARIS CEDEX 8 - https://www.mediateurfevad.fr/ . After prior written action by consumers towards Oscaro Power, the Mediator Service may be contacted for any consumer dispute that has not been resolved. To find out how to contact the Mediator, click here .