The Enphase Single Phase Q-Cable Termination Cap is specifically designed for QCable 2G2.5, providing a reliable and efficient solution for terminating unused ends of Enphase cables from IQ7-IQ8 Series Microinverters.
Technical Specifications:
- Designed for single phase QCable 2G2.5.
- Compatible with 12 AWG (American Wire Gauge) or xG2.5 cables.
- Nominal voltage: 277 VAC.
- Suitable for use in dry or wet conditions (THHN/THWN-2).
- Copper diameter: 2.48 mm.
- Insulation thickness: 1.0 mm.
- Cable outer diameter: 4.5 mm.
Easy Installation:
- Remove 13mm of the cable sheath from the conductors using the lug of the termination cap as a length reference.
- Slide the cable through the hex nut making sure the sleeve inside the plug body stays in place.
- Insert the cable into the plug body so that each lead wire arrives on an opposite side of the internal separator.
- Lock the termination cap by inserting a screwdriver into its handle and tighten the nut to 7 Nm.
- Hold the plug body firmly with a screwdriver while tightening only the hex nut to prevent the conductors from twisting.
- Secure the end of the cable, equipped with the termination cap, to the PV mounting system using cable ties or self-locking clamps to avoid contact with the roof.
Features :
- Easy and quick assembly, thus reducing installation time.
- Ensures a perfect seal of the Enphase 2G2.5 QCable termination, ensuring the protection of your solar system.
- Quality product from the Enphase brand, ensuring optimum reliability and durability.
